Recently Launched Products November 2008 :Standoff Cable Clamps - SCCA & SCCB • Press-through cable entry reduces assembly time and working conditions on the assembly line • Installers are not required to lock or twist the part to lock in the cable • Design of cable entry provides a smooth entry into the clamp as well as a minor locking feature on the SCCB • Cupped base provides better coverage of the hole than traditional tension wings • Cup prevents contaminants moving through the hole and also provides more stability in the panel • Available in UL94 V-2, UL94 V-0, Natural & Black colors, and High Temperature material See PDF file for detailed information November 2008 :Flat Cable Wire Saddle - FCWSS • Designed to hold down standard Serial ATA cable • Flexible wing accommodates a range of cable thicknesses • Provides slight grip on the cable • Locking top is releasable for repair or replacement of cables • Easily installed into pre-drilled hole See PDF file for detailed information November 2008 :Cable Clamp Side Entry - FCCR-1 • Part easily mounts into pre-driven hole • Square mounting hole prevents the part from rotating • Can be used for flat, ribbon or round cables • Tensions wings at the base of the part provide extra pressure to the board to ensure a snug fit See PDF file for detailed information October 2008 : Cable Management Strap - CMS • Adjustable strap gives the ability to mount cables or cable bundles up to 2.125” (54mm) • Arrowhead provides a strong mount into the chassis • Optional anti-rotation 2-prong fix prevents the strap from turning in the hole • Available in 3 colors to suit the aesthetics of the exterior chassis • Easy application and bundling of cables See PDF file for detailed information October 2008 : Flexible Screw Cap - SC1 • Flexible and durable material • Protects from dust and dirt • Suitable for metric and imperial socket button head screws • Aesthetic surface finish See PDF file for detailed information October 2008 :RJ45 Connector Plug - CP-RJ45 Plug developed for industry standard RJ45 Connectors No stress applied to the connectors internal components upon entry Release tab for operation in confined spaces Protects connector from dust and debris See PDF file for detailed information October 2008 :Oil Drain Valve - ODV-1 Can be easily “designed in”by the O.E.M. to replace an oil drain plug. Use will speed engine testing and reduce assembly line time. Can be sold as an aftermarket item to replace an oil drain plug Oil changes are safer, quicker, and neater with Richco’s Oil Drain Valve Standard part has 3/8-18 NPT threads (American Standard Pipe Taper Thread) Part can be customized to accommodate different thread sizes Designed for use on crankcase where oil pressure is typically 5 psi or less Easy to use — remove the cap, install a drain tube, squeeze the tabs and pull open the barrel. After oil has been drained, just push the barrel back in, place the cap on the barrel and you are ready to refill the engine with oil. Manufactured using premium materials Oil drain valve comes with sealant on the threaded casting to prevent leakage from the engine block Has a unique product design that is patent pending Years of testing and development have gone into this product See PDF file for detailed information August 2008 :Sheet Metal Edge Fasterner - SEI • Provides strong threads in metal sheets too thin to be tapped • Reduces hardware • Allows for right angle assemblies • Alternate to self-clinching fasteners • Easily installed by rotating in the side of the panel • Available in two internal threads; #6-32 and M4 • Can be easily removed by pinching the spring leg and rotating See PDF file for detailed information May 2008 :Mains Lead Clamp Clamp mounts into the chassis to secure the mains lead cable Protects the cable from the metal chassis cut out Strain relief arm positively locates into the clamp body Screw housing 'mushrooms' around the screw, forming an integrated sealing washer Clamp accommodates a wide range of panel thicknesses including contoured chassis For a 3.5-4mm thread cutting or self tapping screw See PDF file for detailed information April 2008 :Toggle Screw Grommet - TFR The part snaps in place first for ease of assembly and screw installation Self threading screw is installed, the grommet expands and securely locks the screw and assembled parts in place Grommet legs are forced outward to help seal the mounting hole against dust and moisture Square hole mounting prevents rotation Parts are molded in natural color in durable UL94 V2 Nylon 6/6 See PDF file for detailed information April 2008 :Edge Clip Tie Holder - FTH-31 Simply press the clip onto the edge of a panel to mount a cable bundle The clip accepts a range of cable ties in two directions Plastic housing with assembled metal clip provides strong retention to the panel and versatile mounting for the cable tie The tie holder accepts a range of panel thicknesses from 0.8 – 3mm (0.03 – 0.12”) No panel holes necessary, saving in space on the panel/PCB Clip housing is available in three materials: UL94 V2 Nylon 6/6, UL94 V0 Nylon 6/6, and High Temperature Nylon 4/6. See PDF file for detailed information April 2008 :Blind Hole Mounted Cable Ties - WITBH Barbed mounting head grips to the inside of a hole Ribs deflect when pushed into hole then spring back for a secure lock Easily inserted into threaded, non-threaded, drilled or punched hole Can be mounted to a variety of materials: wood, threaded metal, particle board, plastic, foam or rubber Reduces the number of inventoried parts by eliminating the need for a cable tie mount 22 Kg Tensile Strength Available in standard Nylon 6/6 and Heat Stabilized Nylon 6/6, serviceable to 141ºC See PDF file for detailed information April 2008 :Leg levelling Foot - LLF Innovative design allows simple manual leveling by turning the foot under the weight of the appliance Maximum load is 25 kg. Co-moulded with two engineered thermoplastic materials that combine the elasticity of Thermoplastic Elastomer (TPE) and the durability and strength of Polypropylene (PP) Allows precise leveling of appliances due to uneven floor surfaces PP base provides durable contact with the floor and prevents damage to the floor TPE foot provides vibration control and isolates structural noise 18-8/A2 Stainless Steel Hardware included is RoHS Compliant and meets/exceeds ASTM, DIN, and ANSI/ASME standards. See PDF file for detailed information February 2008 :Snap Foot Rivet - FSR Rubber foot provides skid and shock resistance and vibration control Easily mounted by locating the rivet into the hole, and pressing on the rubber rivet head No assembly hardware required Three rivet sizes allow for mounting into panel thicknesses from 1.2 - 3.5mm Two head styles See PDF file for detailed information December 2007 :Push Spacer on Adhesive - PSB Sturdy construction supports heavily loaded PCB’s Natural color Nylon 6/6 available in UL94 V2 and UL94 V0 6 standoff heights available 17.8mm square footprint with an easy-release tab on the adhesive Allows easy access to underside of the PCB See PDF file for detailed information July 2007 : Flat Cable Clamp, Arrowhead Mount - CFCCA Secures flat cables Serrated grip prevents cable from slipping Easily installed into panel Made in durable Nylon 6/6 material See PDF file for detailed information July 2007 : Panel Fastener, Quarter Turn - FQT Simultaneously installs in both panels and frame with a tap on the head of the fastener with a hammer With a screw driver or coin, a quarter turn releases panel, yet retains fastener in removable panel Molded in a one piece design requiring fewer parts and lower cost Low Profile Can be used multiple times See PDF file for detailed information July 2007 : Vibration Mount - QM Provide vibration dampening and shock control for electronic components Help ensure that the item to which they are mounted remains stable Reduction of structure-borne noise Sturdy, reliable construction Three different styles available Easily mounted with studs and nuts See PDF file for detailed information July 2007 : Self Retaining Screw Grommet - SRSG Grommet snaps into place first for ease of assembly and screw installation When self threading screw is installed, the grommet expands and securely locks the screw and assembled parts in place Spreads load over a wide area Insulates areas of an assembly from electrical and thermal transfer Square mounting hole prevents rotation Usage of a self-tapping screw eliminates cross-threading Parts are molded in natural color in durable Nylon 6/6 See PDF file for detailed information June 2007 : Fan Mount with Gasket - FMG Richco, Inc. is proud to reveal its Fan Mount with Gasket, the FMG series. The FMG provides the benefit of four rubber fan mounts, along with air sealing, in one product. This new part offers vibration control and noise reduction. Additionally, the gasket helps reduce airflow leakage between fan and panel. The Fan Mount with Gasket is available in 3 sizes – for 60mm, 80mm, and 120mm fans. Custom configurations are also available. The FMG is made of a RoHS Compliant EPDM Rubber and withstands temperatures from -4º to 194ºF (-20º to 90ºC) . See PDF file for detailed information May 2007 : Fan Mount, Breakaway Style - FMB Elastomeric, evenly spaced ribs for mounting fans of many different heights Pull-through, breakaway installation tabs ease assembly, especially in blind corners Pull-tab breaks away cleanly after installation for low profile panels Fits Industry Standard DC Fans with a wide range of hole sizes and panel thickness Noise and vibration reduction Reduces the number of hardware for the assembly See PDF file for detailed information May 2007 : Cable Tie Holder - FTH-30 Has the same mounting head as a cable tie Allows bundle with pre-assembled cable tie to be held in place When tail end of the cable tie is inserted, the tie holder locks it into place Can be used as a standard tie holder, using ties that are not pre-assembled Holds all Richco WIT/WITE-18 series cable ties Holder is easily installed in panel; simply snap in place See PDF file for detailed information May 2007 : Arrowhead Mount Cable Tie - WIT-50RLA Snaps into a pre-drilled hole for quick mounting. Bundling of cables can be done either before or after mounting. The arrowhead mount rotates in the hole to self-align the wire bundle. The one-piece mount and harness saves time and money. The WIT-50RLA is available in four different length areas for a variety of bundle diameters. It offers 50 lb tensile strength and is RoHS Compliant. See PDF file for detailed information April 2007 : Flat Cable Clamp - RDAFCC Richco, Inc. is happy to present its new Flat Cable Clamp, the RDAFCC series. The spring action of the clamps safely improves the grip onto the flat cable and reduces movement from vibration. The Flat Cable Clamps are available with adhesive back for quick mounting. Alternatively, parts without adhesive can be installed with plastic or metal screws or rivets. The RDAFCC parts are space saving; they secure cables directly against the board. They are low profile with minimal protrusion from the clamp. The Flat Cable Clamps are available in 3 sizes to accommodate maximum flat cable widths of 25mm, 50mm, and 80mm. Recommended maximum cable thickness is 5mm. See PDF file for detailed information March 2007 : Liquid Tight Plug - LTP Richco is proud to introduce its new liquid tight plugs, the LTP series. This product plugs and seals holes and is liquid tight, tested to IP67 standard. The LTP installs easily with finger pressure and is available in 3 standard sizes. Richco’s liquid tight plugs are made of flexible UL 94V0 rated SBR material. See PDF file for detailed information March 2007 : Wire Saddle On Adhesive Base - WWSB Richco, Inc. is pleased to announce its new wire saddle on an adhesive base, the WWSB series. These wire saddles offer fast, secure, and easy installation. Simply pull the release tab from the adhesive base and attach it to your application. Wires are easily installed and secured by pressing them through the flexible funnel system. The wire saddles are made of durable, UL94-HB certified nylon and are RoHS Compliant. See PDF file for detailed information December 2006 : Quick Cable Gland - KCG Richco, Inc. is happy to present its new quick cable gland, the KCG Series. This waterproof grommet provides slight strain relief and is easy to install by pressing it into the panel manually. This installation is 10 times quicker than that of conventional cable glands! With its patented design, the gland is sealed until it is punctured by the cables passing though. The KCG accommodates panel thicknesses from .059 to .197 inches (1.5 to 5 mm) and is available in two sizes, which accept a wide range of cable bundle diameters. See PDF file for detailed information   December 2006 : Strain Relief Bushing - SRB Richco, Inc. is pleased to announce that its strain relief bushing, the SRB Series, is now UL Listed - #E107293 The bushing absorbs the forces of push and pull that may be exerted on cords and cables. The SRPL-2 tool is required for installation and is sold separately. See PDF file for detailed information   December 2006 : Metal Dual Locking Circuit Board Support - MDLCBS Richco, Inc. is pleased to announce its new metal dual locking circuit board support, the MDLCBS Series. This metal circuit board support is highly conductive and impact resistant. The MDLCBS has an innovative removable design and is made of high temperature and corrosion-resistant stainless steel. The metal lends superior strength and durability. The part is RoHS Compliant, with a patented design. See PDF file for detailed information November 2006 : Fan Mount Multi - FMM Richco, Inc. is proud to present its new Multi Fan Mount, the FMM series. The one piece design of Richco’s multi fan mount fits all industry standard DC fans from 10mm to 51mm. This part allows for easy assembly when mounting in restrictive space and the end can be cut off after mounting to save space. The FMM provides shock and vibration protection. See PDF file for detailed information October 2006 : Break Away Bumper - BAB Richco Inc. is pleased to introduce its new Break-Away Bumper, the BAB series. The break-away bumper offers quick and easy pull-through manual assembly. The mounting tab on the bumper is designed to break away after assembly to save space. These bumpers maintain the aesthetic appearance on the outside of the chassis and have high temperature resistance, up to 482 °F (250°C). The BAB series is made of shock absorbing Silicone Rubber, 35 Shore A, providing anti-skid and anti-marking properties. See PDF file for detailed information October 2006 : Blank Diaphragm Grommet - DGB Richco, Inc. is happy to present its improved DGB series •Environmentally friendly and recyclable TPE material •Greater use in continuously high temperature applications up to 135°C • Improved performance in demanding higher temperature environments that can withstand temperatures up to 135°C • Exceeds the standards set by the RoHS and WEEE directives • Also available in UL94-V0 material by special order • No dimensional changes against the products in the previous PVC material • Thin top film can be pierced to allow a range of different sized wires to pass through See PDF file for detailed information September 2006 : Strain Relief Bushing Richco, Inc. is pleased to announce that its strain relief bushing, the SRB Series, is now UL Listed - #E107293 The bushing absorbs the forces of push and pull that may be exerted on cords and cables. The SRPL-2 tool is required for installation and is sold separately. See PDF file for detailed information June 2006 : Pull Mount Bumper - BPM The BPM is easily installed by pulling the foot through a panel hole No tools or mounting hardware necessary Pull mount end can be cut off after application to save space Rubber material provides shock and vibration protection and skid resistance High temperature resistance -67° to 482°F (-55° to 250°C) RoHS Compliant See PDF file for detailed information June 2006 : Rubber Edge Grommet - RG Richco is pleased to announce its new rubber edge grommet, the RG series. The rubber edge grommet aids in vibration protection and softens sharp edges to prevent chafing and wearing. It is extremely flexible and can be used for internal cutouts or straight edges. The RG series is extruded in a RoHS Compliant rubber material that meets UL HB requirements. The product is available in three sizes to accommodate a range of panel thicknesses. See PDF file for detailed information February 2006 : Led Lens Cover - LEDC Richco, Inc. is proud to introduce its new LED Lens Cover, the LEDC series. The LED lens cover contains a standard 10° lens angle for LED light transmission control. Custom inference angles are also available by special order. The LEDC’s key slot feature and location further control light transmission. T he neoprene rubber o-ring protects LED from dust and water. The LEDC series fits standard 5mm, T1-3/4 LED and is RoHS Compliant. See PDF file for detailed information February 2006 : Releaseable Snap Rivet - RRR Richco is proud to announce the latest addition to its fastener line, the RRR releasable snap rivets. These rivets are ideal for applications in which secured components eventually may need to be removed. These rivets are designed to be assembled without the assistance of an installation tool. To install, simply place the rivet in the hole and press the head. The legs of the rivet are designed to expand, firmly locking the components into place. The unique design of these parts allows for removal of the pin and rivet by simply pulling on the side tabs. These parts come in two sizes to accommodate panel thicknesses from .059”-.217” (1.5-5.5). In addition to working in a round hole, they can also be installed into a non-rotating square hole. These rivets are manufactured out of a durable Nylon material in a black color and are RoHS Compliant. See PDF file for detailed information February 2006 : Door Catch and Striker - DCS Richco is pleased to present its new Door Catch and Striker series. The striker, which is offered in plastic or metal, engages with the catch to ensure a secure lock. The metal spring on the catch improves the mechanical locking properties of the plastic housing. The metal spring on the catch and metal striker make the assembly suitable for harsh, outdoor applications. Richco’s Door Catch and Striker offer quick installation via an easy push fit. The striker can be released with relatively little pull effort. The catch housing is manufactured with durable Nylon 6/6; strikers are manufactured from durable acetal or plated steel. Parts are sold separately and are RoHS Compliant. See PDF file for detailed information February 2006 : Cushioning Push Spacer - PSB Richco is pleased to present its new Cushioning Push Spacer, the PSC series. This flexible spacer deflects under load and absorbs vibration and shock. The standoff mounts to the chassis and supports the PCB or electronic components above it. The tension wings at the base of the part lend extra strain onto the chassis. The PSC series is molded in UV Stabilized, Impact Modified Nylon 6/6 for durability and flexibility. The parts are RoHS Compliant and UL94 HB rated. See PDF file for detailed information January 2006 : Metal Fan Guard - RCOFM Richco is please to release a new series of th Metal Fan Guard Prevents accidental finger injury It acts as a barrier to foreign bodies Mounting with a metal screw allows the guard to conduct static electricity Mounts with a screw or a rivet See PDF file for detailed information December 2005 :Self Mounting Flat Cable Clamp - FCCS Richco is please to release a new series of Self Mounting Flat Cable Clamps. The FCCS series allows for quick routing of flat cables by simply snapping the clamp over the cable. The clamp can then be easily removed by pressing in the side tab. These parts have a low profile to accommodate tight fitting applications. They are available in 5 sizes to accommodate cable widths from 15mm - 60 mm (0.59" - 2.36"). Parts are molded in a durable Nylon 6/6 flame retardant material See PDF file for detailed information September 2005 : Anti-Vibration Grommet Features Absorbs noise and vibration generated by Hard Disk Drives (HDD), cooling fans, motors or other external source of vibration Unique rib design to maximize damping properties Provides high performance energy control in minimum space Made from a soft extremely strong flame retardant Elastomer (UL94-V0) Minimal material migration from grommet to chassis See PDF file for detailed information September 2005 : Minature Fix Features Eradicates the need for conventional methods using screws, washers and nuts Reduces installation costs and provides time savings. Material: High quality Nylon 6/6 (RMS-01) UL Flammability Rating of Material: V2 Typical Applications GPRS modules and wireless applications General Electronics, Infocom and telecom industries Suitable for small, low profile applications See PDF file for detailed information August 2005 : Cable Tie with Rivet Mount Features One part design, saving on installation time and inventory The tie can hold a cable bundle diameter up to 45.0mm The cable tie is releasable and can be used again Made from durable black Nylon 6/6 Standard packaging of 250 pieces See PDF file for detailed information August 2005 : Optical Blown Fiber Connector Features Great connection system for joining standard element tubing to OFBLT for FTTH, FTTP curb-side rack applications where fiber needs extra protection from macro and micro bending. For use with standard element 5mm outside diameter blown fiber tubing or with OFBLT-XX-05-PP. Ideal for FTTH and FTTP blown fiber applications Tube insertion depth is16.8mm (0.66”) with collets in release position. Nitrile ‘O’ rings provides gas and water tight seal Excellent tube retention via collets and metal grip rings. Simple push fit for time saving and ease of installation See PDF file for detailed information March 2005 : Self Threading Mini Support Post Features The threaded hole acts as a die and taps a thread onto the bottom part of the post when engaged Works well in both a # 4 or M3 threaded hole or nut regardless of thread pitch Installed by hand, with or without a tool to give ease of installation See PDF file for detailed information February 2005 : Strain Relief Clamp Markets ●General Electronics ●White Goods ●Office Equipment ●Lighting ●Televisions and Monitors Features ●Provides light strain relief when maximum cable diameter is installed ●Flammability rating of UL94 –V2 ●Offers good cable retention                                                                                              See PDF file for detailed information February 2005 : High Temperature Slit Harness Wrap Features •High Temperature Nylon for applications up to 130 °C •Easy to use. Simply insert the wires into the tool (sold Separately), feed the wrap over the horn and zip the wires into a neat bundle •Allows easy breakout of wires •Provides abrasion protection •Order quantity minimum of 5000 meters                                                                                              See PDF file for detailed information January 2005 : Fan Mount Features •High elongated rubber for easy fan mounting and component assembly •Provides shock and vibration protectionJanuary                                                              See PDF file for detailed information January 2005 : Grounding Finger Features •Helps to eliminate static electricity that is created when air passes through the metallic filter •Enables grounding to the chassis because it is in contact with the metal screw and metal filter •Recommended to use four grounding fingers per assemblyJanuary                                                                                              See PDF file for detailed information January 2005 : Optical Fiber Flexible Guide System Features ●Fully modular system giving complete fiber management and protection at PCB level applications ●For use with 250 and 900 micron fiber ●Fibercan enter and exit at any point, without risk of fibersnagging or kinking ●Angled and straight lugs located along the top of the guide preventing fiberfrom springing out ●‘Snake’the guide through and over components, where space is limited ●Flat and raised supports available, other support post heights and panel thicknesses available by special order                                                                                               See PDF file for detailed information January 2005 : Moulded Nylon Insulator Markets ●General Electronics Industry Features ●Use as screw insulators and in bushing applications ●Reduces vibration ●Strong and corrosion resistant ●ROHS CompliantMeasurements                                                                                               See PDF file for detailed information January 2005 : Ceramic Beads Features ●Parts are serviceable to 1000oC ●Parts are stackable in various height combinations ●Ideal for wave soldering applications ●ROHS Compliant                                                                                               See PDF file for detailed information January 2005: Blind Hole Mounted Clip Markets ● General Electronics ● Games Machine Industry ● Vending Machine Industry ● Furniture Market Features ● Easily pushed into mounting hole using a 6mm hexagonal socket pressed into the mounting fix ● Suitable for Blind Hole Mounting ● Ease of maintenance via releasable cable clip ● Excellent retention force ● Secure fit in panel ● Shorter installation time ● Improves assembly process on production line                                                                                               See PDF file for detailed information January 2005: Touch Control Spacer Product description: ●Spring provides continuous force to light sensors mounted onto a PCB so that they are in constant contact with the cover ●ROHS compliant ●To be mounted over a vertical tab ●Main application for induction hobs and ovens ●Other spring forces, mounts and spacer lengths available by special order                                                                                              See PDF file for detailed information April 2004: Duplex Adapter Blanking Plug Product description: The BPE-LC-D-01-BK LC Duplex adapter blanking plug is the latest edition to our range of BPE blanking plugs for redundant fibre connector ports in racks and patch panels.The LC Duplex adapter blanking plug is suited for a square cut out of 13.5mm (+/-0.05mm) and provides an aesthetic covering.The product also offers protection from dust ingress and foreign objects, preventing any damage to the fibre and electronic components within the panel and rack.The part has retractable panel locator wings which have been specially designed so that the LC Duplex adapter blanking plug can be used with the following panel thicknesses of 0.75mm, 1.2mm, 1.6mm, 2.7mm and 3.75mm. Benefits • Prevents front panel dust ingression • Aesthetically pleasing, blanking off redundant connector ports • Quick and easy installation - simple push fit                                                                                              See PDF file for detailed information March 2004: Side Mount Entry Clip Product description: The Side Mount Wire Saddle (SMWSLT-1-156) gives a versatile and flexible solution to routing and managing cable in confined spaces in metal chassis. Unlike most standard wire saddles, which are usually mounted via a pre drilled/punched hole, the Side Mount wire saddle enables side entry into a pre-punched/pressed slot and without any protrusion.The Side Mount Wire Saddle completely removes the risk of rotation and therefore avoids putting stress and pressure on routed cabling. The top entry locking clip mechanism enables ease of cable installation and maintenance. Benefits • Quick and easy to install/remove - especially in confined space • No protrusion through the chassis • Greater stability - no risk of rotation • Can be mounted in the chassis in any direction/angle • Top entry dip allows ease of access for cable installation/maintenance                                                                                               See PDF file for detailed information February 2004: Twist Lock Label Product description: The TL-F1 series gives a quick and simple solution for cable identification. The twist lock feature enables the TL-F1 to be fastened securely and released by hand, obviating the need for a special installation tool. The large ‘flag-shape’ area allows ease of identification, self-adhesive warning labels can be easily affixed or the area can be written on with a marker pen. The TL-F1 series can accept a large range of cable diameter/bundles. Benefits • Quick and easy to install – no special tool required! • Large area for identification/warning labels • Ease of cable identification in large cable bundles.                                                                                              See PDF file for detailed information January 2004: Hanking Cable Tie Product description: The HTE hanking cable tie provides excellent retention for managing and securing cable bundles. The tie is beaded along its length and is installed by threading the beaded length through the first hole, two beads are securely locked into place by hand and the remainder of the tie is passed through the last hole for extra cable security. The added advantage of the HTE cable tie, is the installation process can be reversed making the tie totally reusable, ideal for tidying power cables on appliances or for additional cable to be installed in your application. The HTE is manufactured in a specially formulated Polyethylene that enables the tie to have a degree of elasticity, which prevents cable bundles being scratched. Benefits • Quick and easy to install • Ball & socket fix gives high retention • Reusable • Prevents cable imprint and scratching                                                                                              See PDF file for detailed information